Jump to content
To block spammers, this forum has suspended new user registration ×
Comet Forums
To block spammers, this forum has suspended new user registration

Como reconozco mi puerto y mi conexion en Windows 7


Recommended Posts

Hola

estoy tratando de compilar la info que me piden para solucionar mi luz amarilla, pero soy un poco burra y no encuentro los datos

Bit Comet 1.28

Windows 7

ip 200.63.XX.XXX

Bloqueado 200.63.XX.XXX:15674

Fire Wall: solucionado, pero el resto no se

tengo wi fi con cableado sin router. no se si sirva.

Gracias

Hi.

I'm trying to collect the info that you require, in order to fix my yellow light but, I'm a bit thick and can't find the data.

BitComet 1.28

Windows 7

IP 200.63.XX.XXX

Blocked: 200.63.XX.XXX:15674

Firewall: solved, but I don't know about the rest.

I have cabled [hardwired?] WiFi, without a router. I don't know if that helps.

Thank you.

Link to comment
Share on other sites

Buenas noches.

A ver, vamos por partes...

BitComet 1.28 - Bien

Windows 7 - Bien

Fire Wall: solucionado

¿Cómo lo has solucionado? ¿Deshabilitándolo? - Muy mal. Vuelve a habilitarlo (lo necesitas, pese a lo que pienses).

tengo wi fi con cableado sin router

¿Cómo se conecta tu ordenador a Internet? ¿Estás en alguna residencia universitaria, o quizás, donde la conexión a Internet la compartas con alguien más?

Good evening.

Let's see... let's go by steps...

BitComet 1.28 - Good

Windows 7 - Good

Firewall: solved

How did you solve it? By disabling it? - Very bad. Go back and enable it (you need it, contrary to what you may think).

I have cabled [hardwired?] WiFi, without a router.

How does your computer connect to the Internet? Are you in some university dormitory, or perhaps, where your connection to the Internet is shared with someone else?

Link to comment
Share on other sites

Hola

Fire wall: permití acceso a BiT Comet, pero esta habilitado

Wi Fi: tengo antena propia, y soy unica usuaria, esta conectado al ordenador por cableado. No tengo router inalambrico ni nada de eso.

Acabo de actualizar mi version Bit Comet a 1.29

Hello.

Firewall: I allowed BitComet access, but it's enabled.

WiFi: I have my own antenna and am the only user - it's connected to the computer through wiring. I don't have a wireless router or anything like that.

I've just upgraded my version to BitComet 1,29.

Edited by cassie (see edit history)
Link to comment
Share on other sites

How does the internet get to the WiFi? Is your WiFi connected via a 2 wire telephone cable? TV Coaxial cable? Ethernet Patch cable? Both the devices in the phone cable and tv cable cases have an incorporated modem, router, switch(if it has more than one Ethernet port) and a wireless adapter, all of which work together. In case the cable is an Ethernet cable connected to your device, it's the same, only it doesn't have a modem.

Note: All of them have a NAT or a firewall for you to deal with,which is started by default. What are its make and model names?

PS:

If Google translate isn't wrong, you're trying to tell me you are connecting to a cell tower with an outdoor antennae. In that case it's most likely firewalled and there's nothing you can do about it. You can call your ISP's tech support and ask, to be sure. If they frown when mentioning BitTorrent, ask if you could run a web or ftp server on your computer.

¿Cómo llega Internet a tu WiFi? ¿Se conecta tu WiFi a través de un cable telefónico de dos hilos? ¿A través de un cable coaxial para TV? ¿Un cable Ethernet? Ambos dispositivos en el caso del cable de teléfono y del cable para el televisón, interiormente tienen un módem, rúter, interruptor (si tiene más de un puerto Ethernet) y adaptor inalámbrico, los cuales trabajan en conjunto. En el caso de que sea un cable Ethernet conectado a tu dispositivo, es igual, salvo que éste no tiene un módem.

Nota: Todos tienen un NAT o cortafuegos, con el cual tienes que hacer frente, y arranca/Inicializa, por defecto. ¿Cuál(es) son la(s) marca(s) y modelo(s)?

PD:

Si el traductor de Google no está equivocado, intentas decirme que te conectas a una torre de comunicaciones  móviles, con una antena exterior. De ser así, lo más probable es que esté detrás de un cortafuegos y no hay nada que puedas hacer. Puedes llamar al soporte técnico de tu ISP para comprobarlo, para asegurarte. Si parecen ser reticentes al mencionar BitTorrent, pregunta si puedes tener un servidor web o ftp en tu PC.

Edited by cassie (see edit history)
Link to comment
Share on other sites

Hi Vasy

I dont understand english very well but I will try

Ethernet Patch cable is mi conexion. there is a lite black box named CARRIER POE ADAPTER /MODEL: UBI POE 24-5

Idont now if that is wath are you asking me

in that case, where can I found de Nat model?

Hola Vasy.

No entiendo muy bien el inglés, pero lo intentaré.

Mi conexión es el cable Ethernet. Hay una pequeña cajita negra que pone CARRIER POE ADAPTER -MODEL UBI POE 24-5. No sé, si es eso lo que me estás preguntando.

De ser así, ¿dónde puedo encontrar el modelo NAT?

Edited by cassie (see edit history)
Link to comment
Share on other sites

I gather from what you have said, that you are using a wireless (WiFi) connection that comes from equipment you do not own or control -- it is not YOUR WiFi router that you connect to.

This situation is very common in hotels, coffee shops, airports, and many places that offer WiFi access. I used to share WiFi access with my neighbors at one point.

If that is the case, you are almost certainly behind a firewall in the WiFi router, and there's probably nothing you can do about that. You will have to operate in no-listen-port mode. That will be much slower, but will still work.

Deduzco, por lo que has dicho, que estás usando una conexión inalámbrica (WiFi) que procede de dispositivos que tu no controlas, ni son de tu propiedad --no es TU [PROPIO] RÚTER WiFi al que te conectas.

Este tipo de conexión es muy común en hoteles, cafeterías, aeropuertos y muchos otros sitios donde ofrecen acceso WiFi. Yo mismo compartí el acceso WiFi con el de mi vecino, en un cierta época.

Si ese es el caso, casi seguro que estás detrás de un cortafuegos en el rúter WiFi, y probablemente no hay nada que tú puedas hacer, al respecto. Tendrás que operar en modo de 'sin-puerto-de-escucha'. Esa forma resultará ser mucho más lenta, pero seguirá funcionando.

Edited by cassie (see edit history)
Link to comment
Share on other sites

I will try to explain me

I have my oun wi fi

I bought the wi fi for me and I dont share with anybody. But it can be the case. because I dont have the control. The office where I bougth the wi fi has it. But who sold me the wi fi isnt my neighbors. It can be posible?

Intentaré explicarme.

Tengo mi propio WiFi.

Yo compré el WiFi para mi sola, y no lo comparo con nadie. Pero puede que sea el caso, porque no lo controlo - la oficina donde compré el WiFi lo tiene. Pero quien me vendió el WiFi no es mi vecino. ¿Puede ser posible?

Edited by cassie (see edit history)
Link to comment
Share on other sites

@bruce: rewrite your posts in Spanish and let's remain patient until Cassie translates them. A lot of misunderstandings can come from the language barrier.

@bruce: reescribe tu post en español y vamos a permanecer pacientes, hasta que Cassie los traduzca. Muchos malentendidos pueden originarse, a causa de la barrera lingüística.

Edited by cassie (see edit history)
Link to comment
Share on other sites

ok

tengo una antena de wi fi para mi sola,

no comparto con nadie.

lo compré así y esta conectado al ordenador por un cable mediante una cajita negra que se llama CARRIER POE ADAPTER /MODEL: UBI POE 24-5

lo que yo no se es si la compañia a la que compre el wifi tiene el control, porque no estan en mi barrio. Ellos abastecen a todo el pueblo donde yo vivo. Lo que se es que la antena es mia y no la comparto. Entra por conexion Ethernet. Pero creo que no estoy ya detras de ningun FireWall

entonces por si acaso tengo salida, como averiguo si puedo hacer algo desde mi Pc? Cómo se si manejo yo la conexion o no?

OK

I have a WiFi antenna all to myself. I don't share it with anyone.

I purchased it like that and it's connected to the computer, via a cable [that comes/stems from] a little black box called CARRIER POE ADAPTER /MODEL: UBI POE 24-5.

What I don't know is if the company from whom I purchased the WiFi from has the control, because they aren't in my neighbourhood. They provide the connection for the entire town where I live. What I know is that the antenna is mine and I don't share it. It enters through an Ethernet connection... but I believe that I'm no longer behind any firewall.

Therefore, in case that I have a chance, how do I find out if I can do something from my PC? How do I know if I manage/control the connection or not?

entonces por si acaso tengo salida, como averiguo si puedo hacer algo desde mi Pc? Cómo se si manejo yo la conexion o no?

Edited by cassie (see edit history)
Link to comment
Share on other sites

Perhaps if you understand how wireless works this will be easier for all of us.

Usually most "wireless" connections which home users employ are not entirely wireless. Meaning that the Internet connection comes to their house mostly (but not limited to) by one of 3 means (as Vasy mentioned):

  • xDSL (through the phone network)
  • TV Cable (through the TV cable network)
  • MetroEthernet (through a dedicated fiber optics network)

From your socket wall a phone/coaxial/Ethernet cable (depending on which of the 3 above you have) will lead to a [modem/switch/router/wireless access point] combo-box. You usually can connect your PC to the box through an Ethernet patch-cord cable or if you want to use the wireless access point in the device, you will use a wireless network card on your PC to connect to the access point (it can be integrated, slot-based or an USB stick).

So, this is what most users mean when they report a "wireless" connection. This is what is known as a "home wireless network" as it will cover the small area of your house and perhaps of your direct neighbors. In these cases, the combo-box device will usually have a firewall integrated and will perform NAT by default, hence you will need to allow incoming connections in the firewall for BitComet and to forward a port in the NAT process.

The other REAL wireless method of connection is to have a wireless connection between you and your ISP provider. This means there is no more xDSL/TV Cable/MetroEthernet wired network which brings the Internet to your house, but instead you will use radio waves to connect directly to your provider (pretty much in a similar way as you would connect to the access point in your house, in the example above).

There are 2 common ways to do this currently:

1. The first method uses exactly the same type of radio frequencies and modulation techniques as in the example above except the access points' transmitting power will be higher, thus covering a larger area than in a home wireless device's case. This will employ a series of access points spread throughout the whole town, positioned in a way that each access point's coverage area overlaps 10-15% of its neighboring access points' areas, so that they form a wireless mesh. This way you can have wireless connectivity covering virtually the whole area of a town. This uses true WiFi technologies, identical to those used in the home wireless devices employing the 802.11x standards.

2. The second method uses a somewhat different type of radio technology that is called WiMAX. This is related to the WiFi wireless one, except that it will use different radio wave specifications (frequencies, channel bandwidth, transmitting power, etc.) thus it's incompatible with the ones above. This is employing the 802.16 wireless standard. In this case, transmitting towers are used, pretty much like those of cell phone company, and the covering range goes up to a radius of 50 km, in wide open spaces.

A possible third option will be provided by cell phone companies themselves which offer nowadays Internet services too, using different other wireless technologies, covered under the 2.5G or 3G umbrella (UMTS, WCDMA, e.a.). While these would qualify as "wireless" in that they don't use wires but also radio waves, they are not part of the wireless standards that define what we usually call WiFi or WiMAX.

No matter which of the two above you would be using, what you would need to use is a WIRELESS NETWORKING CARD.

Since the little black box you speak about is a POE adapter (Power Over Ethernet) its purpose is to provide power to a device which is usually located outside or in a place where it's not feasible to run a regular power outlet.

Which strongly suggests that your "antenna" may not be just an antenna but an all-in-one device which includes an external wireless adapter (WiFi or WiMAX) and an antenna.

That is because the wireless radio signal MUST be converted somewhere into an Ethernet signal before being delivered to your PC (unless you recently installed a new card in your PC and the cable goes into that and then the conversion takes place inside your PC).

So, try to find out what type of device your "antenna" is.

If it really IS a simple antenna, then we're missing a piece of the puzzle.

Anyways, you should know that if you are really using a true wireless connection to your ISP, then it's most likely that no matter what you do you will still get a yellow light, because most wireless ISPs sell only "half-Internet" connections, meaning that incoming traffic is firewalled by default unless initiated from inside, simply because "they know better what's best for you".

If that be the case, your only chance would be to call them and see if you can get an un-firewalled connection or quit them and switch to a wired one (such as any of the 3 types above).

Quizás si entiendes cómo lo 'inalámbrico' funciona, esto facilitará las cosas para todos.

Normalmente, la mayoría de conexiones "inalámbricas" que usan usuarios domésticos no son del todo 'inalámbricas'. Es decir, que la conexión que entra a sus casas en gran parte (pero sin estar limitado a) es a través de tres métodos (como indicó Vasy):

  • xDSL (a través de la red telefónica)
  • TV Cable ( a través de la red televisiva)
  • MetroEthernet (a través de una red dedicada de fibra óptica)

Partiendo de un cajetín en tu pared, un cable telefónico/coaxial/Ethernet (dependiendo de cuál de los tres arriba mencionados tienes) llegará a una caja-combo [módem/interruptor/rúter/punto de acceso inalámbrico].Normalmente puedes conectar tu PC a dicha caja, a través de un cable Ethernet o, si quieres usar el punto de acceso inalámbrico del dispositivo, usarás una tarjeta de red inalámbrica en tu PC, para conectarte al punto de acceso (ésta puede estar integrada, slot-based [de ranura], o un dispositivo USB).

Por tanto, esto es a lo que la mayoría de usuarios se refieren, cuando hablan de tener una conexión "inalámbrica". Esto es lo que reconoce como una "red inalámbrica doméstica", ya que cubrirá la zona pequeña de tu casa y, quizás, la de tus vecinos inmediatos/cercanos. En estos casos, la caja-combo normalmente tendrá un cortafuegos incorporado y operará NAT, por defecto – por tanto, necesitarás permitir conexiones entrantes en el cortafuegos para BitComet y abrir el puerto en el proceso NAT.<br style="">

El otro VERDADERO método inalámbrico para conectar es teniendo una conexión inalámbrica entre tú y tu proveedor ISP. Esto significa que ya no hay una red cableada de xDSL/ cable de TV/MetroThernet hacia tu casa, sino que usarás ondas radiofónicas para conectar directamente con tu proveedor (básicamente de la misma forma en que te conectarías al punto de acceso en tu casa, en el ejemplo arriba mencionado).<br style="">

De momento, existen dos maneras comunes para hacerlo:

1. El primer método usa exactamente las mismas frecuencias y técnicas de modulación que en el caso anteriormente citado, con la excepción de que la potencia de transmisión de los puntos de acceso serán mayores y, por tanto, cubrirá una mayor área que en el caso de un dispositivo inalámbrico doméstico. Este usará una serie de puntos de acceso, tendidos por toda la ciudad, posicionados de tal manera que el área de cobertura de cada punto de acceso se sobrepone un 10-15% sobre el área de los puntos de acceso adyacentes, formando, de esta forma, una malla inalámbrica.

2. El Segundo método usa una tecnología radiofónica un tanto distinta, la cual se llama WiMAX. Ésta está relacionada a la inalámbrica WiFi, con la excepción de que usará especificaciones de ondas radiofónicas distintas (frecuencias, ancho de banda, potencia de transmisión, etc.), por tanto, siendo incompatible con las arriba mencionadas. Ésta usa el estándar inalámbrico de 802 16. En este caso, se usan torres transmisoras, muy parecidas a las de una compañía de telefonía móvil, con el área de cobertura pudiendo alcanzar hasta un radio de 50 Km, en espacios abiertos.

Una posible tercera opción la proveerán las compañías de teléfonos móviles en sí, que, hoy en día, ofrecen servicios de Internet, también, usando tecnologías inalámbricas distintas, las cuales se encuentran bajo la denominación 2.5G o 3G (UNTS, WCDMA, y demás). Mientras estas se pueden calificar como "inalámbricas" (ya que no usan cables sino ondas de radio), no forman parte de los estándares inalámbricos que definen a lo que solemos referirnos como WiFi o WiMAX.<br style="">

Ya que la cajita negra de la cual hablas es un adaptador POE (Power Over Ethernet), si propósito es proveer potencia a un dispositivo que normalmente está en el exterior o en un sitio donde no es factible usar una toma de corriente normal.<br style="">

Lo cual sugiere que tu "antena" puede no ser meramente una antena, sino un todo-en-uno, la cual incluye un adaptador inalámbrico externo (WiFi o WiMAX) y una antena.<br style="">

Esto es porque la señal inalámbrica de radio TIENE que ser convertida – en alguna parte – a una señal Ethernet, antes de que se pueda entregar al tu PC (salvo que recientemente hayas instalado una nueva tarjeta en tu PC, y el cable se conecta a ésta, efectuando la conversión internamente.<br style="">

Por tanto, intenta averiguar qué tipo de dispositivo es tu antena. Si realmente ES una sencilla antena, significa que carecemos de una pieza del rompecabezas.<br style="">

De todas formas, deberías saber que si de verdad estuvieses usando una conexión verdaderamente inalámbrica a tu ISP, entonces lo más probable es que, sin importar lo que tú hagas, seguirás obteniendo una luz amarilla, porque la mayoría de ISPs inalámbricos sólo venden conexiones "medio-Internet, significando que el tráfico entrante estará impedido por un cortafuegos (por defecto), al menos de que se inicie desde dentro, sencillamente porque "ellos saben, mejor que tú, lo que te conviene".

Si este es el caso, tu única posibilidad sería llamarles y ver si podrías obtener una conexión SIN cortafuegos, o marcharte y cambiar a uno cableado (como en cualquiera de los tres ejemplos de arriba).

Edited by cassie (see edit history)
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...