nakedS

I solve the problem yesterday.It turns out that first router was giving a wrong IP adress to the WAN port on the second router.Now everything works fine. Thanks again for your help The UnUsual Suspect.

I've read the article about cascading routers and did everything but still got yellow light in Bitcomet.I really don't know what to do.Can you help me Guradian Eagle?I'll post pics if i had to just to make this work.

No,because i don't see anything except this start page.

I forwarded ports on 1st and 2nd router,but i think that main problem is my subnet mask.Now i see that 1st one have subnet 255.255.255.255 and 2nd have 255.255.255.0.I don't know is it possible to change that somehow?

Hi all.I have this problem some time and i can't solve it.Before i changed my ISP everything was Ok,but now i have new modem/ruter and i forwarded ports but still have a yellow light in Bitcomet and this error about TCP. TCP Connections: Established: 8 [MAX:65] / Half-Open: 12 [MAX:65] LAN IP: 192.168.0.101 WAN IP: Listen Port of TCP: 23595 (Blocked by Firewall/Router) Listen Port of UDP: 23595 (Opened in Firewall/Router) Windows Firewall: Added [TCP opened, UDP opened, TCP(ED2K) opened, UDP(ED2K) opened] UPnP NAT port mapping: Added I'm behing two routers adn i use Bitcomet 1.36 because 1.37 doesn't work on WinXP SP2 32-bit.First one (main ADLS router) is TP Link TD-W8951ND and second one is TP Link TL-WR941ND.Internet connection is 17Mb ADSL,antivirus is turned off,only firewall from windows is enabled. Can you tell me why i got only TCP blocked while UDP is open?Thanks in advance.