BlastG

Today i asked them again. They were categorical that it is a switch TP-Link, not a router. Also i checked my neighbour's BitComet, his listen port is blocked too: LAN IP: 192.168.0.100 WAN IP: 62.73.109.108 (same as mine) Listen Port of TCP: 14030 (Blocked by Firewall/Router) Listen Port of UDP: 14030 (Opened in Firewall/Router) Windows Firewall: Added (TCP Added, UDP Added) UPnP NAT Port Mapping: Added IPConfig: IPv4: 192.168.0.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.1 DNS: 10.64.68.1 (same as mine)

My first default gateway (default gateway of PPP Adapter Unisat) - 0.0.0.0 Subnet Mask 255.255.255.255 IPv4 adress 10.64.68.*** Second default gateway (Ethernet Adapter Ethernet) - 10.64.69.1 Subnet Mask 255.255.255.0 IPv4 Adress 10.64.69.** I've question about the router. I learnt that i can open a port for BitComet after login in My WAN IP/webfig/ So if i succeed to unlock router's box and see its model, will i be able to log in in My WAN IP/webfig/... i mean can the password for My WAN IP/webfig/ be changed by my ISP?

TCP Connections: Established: 0, Half-Open: 0 LAN IP: 10.64.68.*** WAN IP: 62.73.109.*** Listen Port of TCP: 21188 (Blocked by Firewall/Router) Listen Port of UDP: 21188 (Opened in Firewall/Router) Windows Firewall: Failed UPnP NAT Port Mapping: Failed [uPNP Device Not Found!]

Take a look at these pictures. I am connecting to Internet through WAN Miniport (PPPoE), i have just one cable into my desktop computer and it is all.

You mean the switch (which is outdoors) is basically a router? My ISP had said that it is a switch. To identify what? Router's model? Router's IP? Do i have to open the box (the switch is in a locked box). Would you clarify, please? I have never used router before.

It seems so. My LAN IP (IPv4 adress) is 10.**.**.*** My WAN IP is 62.**.***.*** I have a switch outside. What can i do?

Actually my current listen port is 18210, which is invisible at canyouseeme.org Error: I could not see your service on **.**.***.*** on port (18210) Reason: Connection refused Whereas my port 80 is working fine. I mean i am not using it as a listen port, i just checked it whether it is working or not.

Hello guys. I have a problem with blocked listen port and a yellow light since i went to Windows 8.1 (previous OS: Windows 7 x64), also there writes "Blocked: My IP: My current Listen Port". As long as i was using Windows 7, Bitcomet was working fine and i was getting maximum speed of 21 Mbps. My OS: Windows 8.1 x64 Internet access: Broadband connection Router: NO BitComet: Last version Antivirus: ESET NOD32 I checked my port 80 at canyouseeme.org Response - Success: I can see your service on **.**.***.*** on port (80) Your ISP is not blocking port 80 In Windows Firewall/Allow Apps to communicate through Windows Firewall both boxes are checked. Please, help me.