Jump to content
Comet Forums
Memorios

Router blocking TCP

Recommended Posts

Bitcomet 1.29, Windows XP sp3 32 bit

Dell Inspiron 6000

Intel Proset Wireless 2200BG

Router N-Max LevelOne WBR-6020

Server: Intelnet.gt

TCP optimizer at 512 Kbps

Need assistance with setting up router to open BitComet WAN TCP Port. Have LevelOne WBR-6020 Users Manual but can be a little confusing.....to a novice

Share this post


Link to post
Share on other sites

Cannot get WAN TCP open. Have tried forwarding ports in router using LAN IP and then using WAN IP....no luck...tried DMZ ... no luck....also tried disabling NAT but its a little confusing because it shows:

NAT disable _____ Enable (this is a check box option)

which means place a check mark in the enable box to Enable the NAT disable? OR Enable the NAT? Also found that I am a DHCP client to the DD-WRT listed below which leads me to ask if its ports need to be forwarded?

Router System Information

Router Name DD-WRT

Router Model WHR-HP-G300N

LAN MAC 00:24:A5:B4:26:87

WAN MAC 00:24:A5:B4:26:87

Wireless MAC 00:24:A5:B4:26:87

WAN IP 192.168.1.15

LAN IP 192.168.0.1

SSID

The ...... NET

Channel

11 (2462 MHz)

TX Power

13 dBm

Rate

108 Mb/s

Wireless Packet Info

Received (RX)

6303191 OK, 12056 errors

Transmitted (TX)

8497888 OK, 21 errors

Services

DHCP Server

Enabled

WRT-radauth

Disabled

Sputnik Agent

Disabled

Wireless Clients

MAC Address Interface Uptime TX Rate RX Rate Signal Noise SNR Signal Quality

xx:xx:xx:xx:96:45 ath0 1 day, 9:41:01 104M 54M -73 -111 38

25%

xx:xx:xx:xx:c7:60 ath0 1 day, 9:40:51 1M 104M -111 -111 0

0%

xx:xx:xx:xx:0c:d8 ath0 1 day, 9:39:00 104M 1M -78 -111 33

19%

xx:xx:xx:xx:d6:20 ath0 7:13:34 54M 18M -74 -111 37

24%

xx:xx:xx:xx:62:01 ath0 4:17:52 104M 104M -96 -111 15

0%

DHCP

DHCP Clients

Host Name IP Address MAC Address Client Lease Time

********* 192.168.0.xxx xx:xx:xx:xx:37:08 1 day 00:00:00

******** 192.168.0.xxx xx:xx:xx:xx:1D:39 1 day 00:00:00

******** 192.168.0.xxx xx:xx:xx:xx:30:DA 1 day 00:00:00

*********** 192.168.0.xxx xx:xx:xx:xx:98:FA 1 day 00:00:00

******** 192.168.0.xxx xx:xx:xx:xx:C5:89 1 day 00:00:00

********* 192.168.0.xxx xx:xx:xx:xx:50:14 1 day 00:00:00

******** 192.168.0.xxx xx:xx:xx:xx:C5:89 1 day 00:00:00

Firmware: DD-WRT v24SP2-MULTI (05/28/10) std

Time: 07:42:39 up 1 day, 9:41, load average: 0.00, 0.00, 0.00

WAN IP: 192.168.1.15

This is my Router Stats:

ADMINISTRATOR's MAIN MENU

Item WAN Status Sidenote

Remaining Lease Time 21:48:04

IP Address 192.168.0.1xx

Subnet Mask 255.255.255.x

Gateway 192.168.0.1

Domain Name Server 192.168.0.1 , 0.0.0.0

MAC Address 00:12:F0:01:50:xx

Wireless Status

Item WLAN Status Sidenote

Wireless mode Enable

Operation Mode AP mode (B/G/N Mixed)

SSID xxxxxxxx

Channel Auto

Security None

MAC Address 00:11:6B:2D:72:xx

Statistics Information

Statistics of WAN Inbound Outbound

Bytes 2628404784 145702111

Unicast packets 1998687 1377606

Non-unicast packets 0 0

Device Time: 2011/12/18 00:53:57

Edited by Memorios (see edit history)

Share this post


Link to post
Share on other sites

If you have a private WAN address this means you are behind another NAT router.

That's why we ask users to not waste our time and give ALL the information required in the "Read This Before Posting" announcement on top of the section.

If you would provided all the details (modem type and/or Internet connection type) we would have know that already.

Anyway, the guide I linked you to, provides guidelines for people who have daisy-chained routers, as well.

Just give it another read.

Share this post


Link to post
Share on other sites

Thanks for your quick response and excuse the fact that I did not include ALL the info the first time ...only because I did not have that info available as your answer suggests about a private WAN and another Router. If that info was available to me at the time of my posting I would have included it as well. I did read the link and am still working on it...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...